KW-EXPart reports · samples written for this demo

Examples

Three requests that arrived incomplete, and what the review agreed before the quotation. Load any of them into the capability check and change one thing.

An aluminium fixture block has four dowel holes and a broad milled step.

PR-01 · Fixture block

25 fixture blocks, EN AW-6082-T6, 120 × 80 × 30 mm

The request: “Quote 25 fixture blocks in 6082-T6. Envelope 120 × 80 × 30 mm. General dimensional request ±0.10 mm.”
Left open: The request gave the envelope and a general ±0.10 mm, but no pocket depth, datums or finish.
Settled: Both mills screened within. One reply listed the missing details, and the quotation followed the complete pack.
Agreed before quoting: Pocket geometry, datums, hole and thread details, finish, drawing revision, inspection and requested delivery.

SpecificationEN AW-6082-T6 · Block 120 × 80 × 30 mm · ±0.10 mm · 25 parts · As machined

Read the part report Use this example in the check

Illustrative multi-face machined aluminium housing.

PR-02 · Multi-face housing

10 housings, EN AW-7075-T6, 140 × 120 × 80 mm

The request: “Review 10 housings in 7075-T6, 140 × 120 × 80 mm. Some features need ±0.02 mm.”
Left open: Some features needed ±0.02 mm, tighter than the 3-axis screening range, and the faces related to each other.
Settled: 5-axis screened within. The review named the ±0.02 mm features and agreed the datum scheme before quoting.
Agreed before quoting: Which features need ±0.02 mm, the datum scheme, surface finish and workholding.

SpecificationEN AW-7075-T6 · Block 140 × 120 × 80 mm · ±0.02 mm · 10 parts · As machined

Read the part report Use this example in the check

Three turned brass bushings stand in a row with their bores and circumferential grooves visible.

PR-03 · Turned bushing

100 bushings, brass CW614N, Ø30 × 80 mm

The request: “Quote 100 CW614N bushings, Ø30 × 80 mm, requested dimensional tolerance ±0.05 mm.”
Left open: Turning fitted the size, but brass always needs an application and compliance discussion.
Settled: The buyer stated the intended use and the evidence their product needs. Material review came first, then the quotation.
Agreed before quoting: Bore, fit, end use and lead restrictions, finish, inspection and date.

SpecificationBrass CW614N · Round Ø30 × 80 mm · ±0.05 mm · 100 parts · As machined

Read the part report Use this example in the check

Illustrative, AI-generated. The parts, problems and outcomes are fictional.

Have a part like these?

Prepare an RFQ