KW-MMaterials · data revision 2026-10-12-demo-2
Six listed grades
Each grade has its own datasheet: condition, screening by process, finishes and the questions we ask before quoting. Other grades are welcome as Other; they go to review.
Metals
Aluminium, stainless steel and brass. Metal screening ranges: ±0.05 mm on 3-axis, ±0.02 mm on 5-axis and turning.
-
KW-M-01
EN AW-6082-T6
An aluminium starting point for fixture plates and general brackets.
- Condition
- T6
- 3-axis / 5-axis / turning
- ±0.05 / ±0.02 / ±0.02 mm
- Listed finishes
- Anodise, Plating, Heat treatment
-
KW-M-02
EN AW-7075-T6
Bring the strength requirement and the full drawing to the review.
- Condition
- T6
- 3-axis / 5-axis / turning
- ±0.05 / ±0.02 / ±0.02 mm
- Listed finishes
- Anodise, Plating, Heat treatment
-
KW-M-03
Stainless steel 304
Discuss the exposure and surface finish as well as the dimensions.
- Condition
- Confirm stock condition
- 3-axis / 5-axis / turning
- ±0.05 / ±0.02 / ±0.02 mm
- Listed finishes
- Passivate, Plating, Heat treatment
-
KW-M-04
Stainless steel 316L
State the environment that led you to specify 316L.
- Condition
- Confirm stock condition
- 3-axis / 5-axis / turning
- ±0.05 / ±0.02 / ±0.02 mm
- Listed finishes
- Passivate, Plating, Heat treatment
-
KW-M-05
Brass CW614N
A drawing-led enquiry for a turned brass component.
- Condition
- Confirm stock condition
- 3-axis / 5-axis / turning
- ±0.05 / ±0.02 / ±0.02 mm
- Listed finishes
- Plating, Heat treatment
Polymer
POM-C, an engineering plastic. Wider screening ranges: ±0.10 mm on 3-axis, ±0.05 mm on 5-axis and turning.
-
KW-M-06
POM-C
Describe the load and temperature as well as the shape.
- Condition
- Confirm stock grade and colour
- 3-axis / 5-axis / turning
- ±0.10 / ±0.05 / ±0.05 mm
- Listed finishes
- As machined only listed
Another grade on your drawing?
Choose Other in the check or the RFQ and name the grade. We tell you which stock we can source and what the review needs before quoting. The list is not material-selection advice.
Illustrative, AI-generated. Listed finish pairings are screening assumptions and always need review.
Know the grade and the size?